MEGGER MIT515⚡️INSULATION RESISTANCE TESTER MEGOHMMETER (5000VDC) | NEVER USED✨

Description

LAST MEGGER UNIT THAT WE HAVE IN STOCK AND IS NEARLY ,000 BELOW MSRP - WHILE SUPPLY LASTS, GRAB IT WHILE YOU CAN 👍
Need it quicker than expected for a job? Message us upon purchase and request expedited shipping and we will add it at no extra cost to you, if you need it. 👍
When you make the investment in this type of equipment, you want to make sure you get the right one the first time. This unit is in brand new condition with used leads & data cable still in their plastic packaging; unit was just kept around the shop as old stock and has up-to-date calibration. Ready to be taken out and put straight to work. With other MIT515 options online, choose ours; you’ll be very pleased with what you receive in the mail.
A little about us:
We value customer service FIRST and strive to hand-select the very best pieces possible for you all, so you can shop with confidence.
WE DO NOT USE STOCK/ARCHIVED IMAGES. Photos are part of the description, so please reference images for a detailed depiction of the EXACT item you’ll be getting.
*No original box or instruction booklet included.
Although tested to be in perfect working condition, we do not offer technical support.
We ship carefully & quickly - please allow 1-2 business days.
Thanks for shopping our store! 🛍️
A little about the product:
Megger MIT515-Kit
MIT515-KIT MIT515 with a VF5 Voltage Detector, Extra-long 16.5 ft lead set
Measures up to 10 T-Ohms
Selectable test voltage from 250 to 5000 V
PI, DAR, and DD test
CAT IV 600 V safety rating
MIT515 Insulation Resistance Tester with VF5 Voltage Detector Lead Set
MIT515 5 KV Insulation Resistance Tester
Offering CAT IV, the MIT515 is the simplest of Megger's new range of small light 5 kV insulation resistance testers for the testing and maintenance of high voltage electrical equipment. Enclosed in a tough case it is both smaller and lighter than its predecessor making it even easier to carry and store.
Now equipped with lithium ion fast rechargeable batteries, the instrument has a large, clear, easy to read, display making it equally suitable for use in both bright sunlight and poorly lit environments. The information displayed includes resistance, voltage, leakage current, capacitance, battery status and time constant. In addition, the elapsed time of the test is displayed constantly removing the need for a separate timer.
The new range of insulation resistance testers consists of three models: two 5 kV units (MIT515 and MIT525) and a 10 kV unit (MIT1025). Resistance measurement is available up to 10 TΩ for the 5 kV models and 20 TΩ for the 10 kV model. The new instruments are smaller and lighter than previous models yet offer advanced features and rapid charge capability.
A key productivity feature is the ability to take measurements when connected to line power/mains with a dead battery. Intelligent battery charging ensures the optimum charge rate as a function of battery level, resulting in minimum charge times.
The rugged, unique dual case design provides the ultimate protection for a portable instrument and a clip-on lead pouch ensures that leads always remain with the instrument. The case lid is removable for improved terminal access. The IP rating is IP65 with the case closed preventing water/dust ingress. High reliability and safety are built in; all models are safety rated to CATIV 600 V and are double insulated.
Five preset voltage ranges are provided in insulation test mode, plus a user-settable lock voltage range. Any selectable test voltage may be locked and restored via the selector switch, thereby increasing the efficiency of commissioning and repetitive tests. Preconfigured diagnostic tests include Polarization Index (PI), Dielectric Absorption Ratio (DAR), dielectric discharge (DD), Step Voltage (SV) and ramp test. The ramp function gradually increases voltage up to a selected level while graphing current vs. voltage (graph downloadable). Graphs can be compared to example curves in IEEE 95-2002 to reveal a variety of faults difficult to detect otherwise. Small defects can be easily detected without risking the sudden large
voltage increments produced by a Step Voltage test. Monitoring the developing graph during the test enables the operator to terminate prior to breakdown, thereby reducing the possibility of damage to already flawed insulation. These units are particularly informative on polyester, asphalt and epoxy-mica insulations. They can also test voltage suppression devices.
The simplicity of operation is achieved with two rotary switches and the large backlit display enables multiple results to be displayed simultaneously.
Advanced memory storage includes time/date stamping of results, logging of data and recall of results to screen. A fully isolated USB device interface (type B) is used for the safe transfer of data to Megger’s PowerDB asset management software.
Typical end users include:
Electrical contractors
Testing and service companies
Wind farm and solar generation operators
Power generation and distribution companies
Industrial companies
Rail companies
APPLICATIONS:
The units are designed for testing the insulation of high-voltage electric equipment. Their wide voltage range also allows applications for low-voltage equipment. Generators, motors, transformers, cables and switchgear all require effective maintenance. The test techniques on the instruments provide valuable diagnostic information.
All three instruments test the insulation resistance of:
High-voltage power cables and high-voltage buses
Large motor/generator windings
Line and substation transformers
The MIT525 and MIT1025 also perform spot tests, step-voltage tests, dielectric discharge tests, ramp tests, and dielectric absorption tests for the following applications:
Acceptance testing at installation to check conformance to specifications.
Routine preventive/predictive maintenance testing after installation.
QA testing as part of the manufacturing process.
Diagnostic testing to isolate faulty components for repair.
With its higher voltage testing capability, the MIT1025 is the perfect everyday work tool for manufacturers, users and maintainers of rotating machinery. Designed in accordance with the requirements of IEEE43:2000, the MIT1025 is ideal for measuring the insulation resistance of armature and field windings in rotating machines rated 1hp (750 W) or greater. The standard applies to synchronous, induction and dc machines as well as synchronous condensers.
>CATIV 600V rating on ALL terminals >Easy-to-read rotary test selection button includes IR, IR(t), DAR, PI, DD, SV and Ramp Test
​
VF5 AC Voltage Detector
The Megger VF5 Voltage Detector is intended to be used to check for the presence of AC voltage, indicated by a bright red LED situated within the white nylon tip, an audible sounder, plus a vibration alert. The detector has both low voltage (12 - 1000 V) and medium voltage (100 - 1000 V) ranges. The VF5 has the added advantage of a bright white LED torch for use in poor light.
APPLICATION
Suitable for identifying live conductors, finding a break in a conductor, or verifying a blown fuse while in a circuit and detecting AC voltage at socket outlets, switches, circuit breakers, fuses, cables, and luminaires.